InvisaCook

InvisaCook

InvisaCook is an induction hob positioned under the kitchen countertop, which heats the pans through the surface. It enables cooking directly on the surface, and use of the surface when the cooking system is inactive.

• Approved for Caesarstone Porcelain with the guidelines below
• Not approved for Caesarstone ICON

Guidelines

Fabrication

• Although removing the fiberglass mesh backing is not mandatory, we recommend removing the mesh throughout the entire cooktop area, as well as in the areas where the clips are glued.

Installation

• Installation should be performed according to the manufacturer’s instructions.
• Allow for 250mm between the centre of each cooking zone and any edge, joint or cut-out.
• Manufacturer’s installation instructions:

Care & Maintenance

• Due to the working environment, the surface may become stained. It is therefore important to clean the surface after cooking and once the area has cooled down, to prevent stubborn stains from developing.
• Clean according to the Caesarstone Care & Maintenance guidelines.

Usage

• The system is intended for cooking time of up to 5 hours. It is not to be used as a hot plate to keep food warm for extended periods.

Safety

• Note that when using InvisaCook the surface may become hot to the touch.

InvisaCook Online

• Manufacturer’s website: Invisacook | The Original Invisible Cooktop | APAC
• Installation manual download: Invisacook APAC

Caesarstone provides warranty for applications fabricated from Caesarstone surfaces, and for Caesarstone surfaces in which products are installed, provided that those appliances and applications are approved for use by Caesarstone, and installed in accordance with the manufacturer’s instructions, Caesarstone fabrication and installation guidelines, and any additional guidelines relating to those appliances and applications. A complete list of approved appliances and applications with guidelines is available at Special Applications and Products.